基于双态混沌PSO的机载激光通信视轴稳定控制

机载空间激光通信视轴稳定是激光通信链路建立的前提。在视轴稳定平台中应用自抗扰控制方法取得了良好的控制效果,但自抗扰控制需调整参数众多且缺乏规范的调整手段。针对自抗扰控制调参难的问题,本文提出了一种利用双态混沌粒子群算法优化自抗扰控制参数的方法。仿真结果表明,与PSO-PID控制方法相比,该方法具有更快的响应速度,更强的抗干扰能力和更好的鲁棒性。     

Preparation of (110)-oriented SrTiO3 film on quartz glass by laser chemical vapor deposition

SrTiO₃ (STO) film was prepared on quartz glass by laser chemical vapor deposition at a deposition temperature (T_dep) ranged from 760 to 1104 K. Effect of the T_dep on the orientation, crystallinity, texture, and microstructure of the STO film was investigated. As the T_dep was increased, the preferred orientation of the STO film tended to be (110)-orientated with corresponding texture coefficient (TC) on the (110) reflection enhanced from 2.3 to 6; meanwhile, the full width at half maximum of the ω-scan on the (110) reflection decreased from 0.85° to 0.59°. The (110)-oriented grains were in wedge shape about 60 × 150 nm in size, which tended to be flat at an elevated T_dep of 1104 K.     

基于激光闪光法的立式热扩散率测量装置研究

介绍了基于激光闪光法的立式热扩散率测量装置,利用脉冲激光对样品进行均匀加热,使样品内部产生一维热流,并通过红外探测器测量样品温升信号,采用立式真空加热炉控制测量温度环境,实现室温至1600℃的热扩散率测量。用该装置测量厚度为1. 1 mm,直径为10 mm的不锈钢样品,测量结果与PTB参考数据的偏差小于1%。     

QKD系统中基于EA电路的诱骗态实现

使用诱骗态量子秘钥方案可以解决因光子数分离攻击而导致的安全漏洞,保证了长距离量子通信的安全。本文介绍了量子通信的相关原理,通过对电吸收调制电路和激光器驱动电路的设计,精确控制产生了1550 nm波段的窄脉冲,经过内部调制成功制备诱骗态光脉冲,其强度约为信号态光脉冲的三分之一,因激光器的同一性而具有一致的光学特征从而避免了时频窃听,并具有强度可调的优点。     

靶面激光光斑尺寸原位测量的研究

提供了一种简便易行的靶面激光光斑尺寸原位测量的方法。从高斯光束的横向光强分布特性出发,建立了激光烧蚀斑半径与辐照激光能量、光斑尺寸、烧蚀阈值间的关系式,模拟分析发现辐照激光光斑尺寸对烧蚀斑半径随辐照能量变化曲线有较大影响。对于脉宽为2 ms,波长为1064 nm的激光,实验测量了不同能量激光辐照下相纸烧蚀斑半径,并用推导出的关系式拟合测量数据,获得了靶面处光斑尺寸和样品烧蚀阈值。同时,也测量了不同位置处的光斑尺寸和样品烧蚀阈值,对高斯光束束腰位置和样品烧蚀阈值的光斑尺寸效应进行了验证。研究结果表明该技术结果可靠,简单高效。该技术可以为高能激光与固体物质相互作用的基础研究和激光加工等应用领域中实现简单方便地测量靶面光斑尺寸提供帮助。     

磁场环境下铝电解熔融铝液成分激光诱导击穿光谱原位测量分析

铝电解车间具有高温、强磁、多粉尘等环境特点,当前生产过程中熔融原铝的成分检测主要是人工取样然后离线分析,化验过程及结果具有较大的滞后性,故将激光诱导击穿光谱(LIBS)技术应用于铝电解车间铝液成分原位、实时测量具有重要意义。实验采用Nd:YAG脉冲激光器,多通道光纤光谱仪和电感耦合器件(CCD)探测器组成的激光诱导击穿光谱测量系统对电流为400kA电解槽中熔融铝液的主要成分铁、硅进行了探测,对原铝中部分元素的特征谱线进行了归属分析。考察了激光能量在磁场环境下的衰减变化及谱线梯度变迁规律,结果表明,距离电解槽边缘约2m处激光能量衰减达最大。分析了磁场对测试系统的影响,并建立了定标曲线,铁和硅两种元素按照内标法建立的定标曲线拟合度分别为93.50%和97.10%,采用该模型进行了测试实验,并用国标GB/T 7999—2015中光电直读发射光谱(OES)测试的相关指标验证测试结果的重复性与允许差。实验证明,LIBS技术在电解铝行业在线检测方面具有较好的应用前景,但是测试的稳定性与重复性也是面临的一个重要问题。     

Pump laser induced photodarkening in ZrO2-doped Yb:Y2O3 laser ceramics

5 at.% Yb:Y₂O₃ transparent ceramics were fabricated using vacuum sintering plus HIP. The ceramics doped with 1 at.% ZrO₂ as the sintering additive were densified at 1700 °C in vacuum followed by HIPing at 1775 °C, while those without sintering additives were densified at 1520 °C in vacuum followed by HIPing at 1450 °C. After sintering, both ceramics had relatively high in-line transmittance. However, during laser experiments, the ZrO₂-doped Yb:Y₂O₃ (Zr-YbY) ceramics were photodarkened when irradiated by 940 nm pump light. The discoloration might be attributed to the formation of Zr³⁺ color centers during lasing. In contrast, no photodarkening effect was detected in the pure Yb:Y₂O₃ ceramics without sintering additives (P-YbY). The P-YbY ceramics exhibited much higher lasing efficiency (17%) than the Zr-YbY ceramics (9%). To our best knowledge, it is the first time that the photodarkening effect was detected in rare-earth doped sesquioxide laser ceramics.